 
 Andres Bennett
Joined 3 months ago
 Reputation
 36
 Awards
  — 
 
Next: 🥉 Bronze at 100 • 36%
   
 Questions Asked
 0
 Answers Given
 4
 Specialty
 Mathematics
 No questions asked yet
 Andres Bennett hasn't asked any questions.
 How do I fix a blender that won't turn on anymore?
Asked 1 month ago • 53 votes
   0 votes 
 
Answered 1 month ago 
 Start with power checks by resetting any GFCI outlets in the kitchen or bathroom, inspecting the breaker, and plugging the blender directly into a proven wall outlet rather than a strip. Then confirm the jar and lid interlocks are fully engaged and the control knob makes contact by cleaning and cycling it; if it still stays dead the thermal fuse or main switch may have failed, so consider a repair shop or replacement.
 Which baby monitor has the best range for a two-story house?
Asked 1 month ago • 40 votes
   0 votes 
 
Answered 1 month ago 
 For a large two-story home, go with a dedicated handheld claiming around 3000 feet of range instead of an app since floors and insulation sap signal. Elevate the parent unit, keep it a few feet from your router, and expect less range than the spec.
 Why is my coffee maker leaking water everywhere?
Asked 1 month ago • 35 votes
   4 votes 
 
Answered 1 month ago 
 YEP and been there.
The usual culprits are the reservoir seal, basket overflow, or a crack in the tank or tubing and...
start with a cold test.
Fill the tank and set the machine on a dry paper towel without turning it on.
If it weeps cold, you have a bad seal or a crack in the reservoir area.
Reseat the tank and inspect the outlet gasket for nicks or twisting, then check for hairline seams.
If it only leaks during brewing,, look for an overflow.
Make sure the filter sits flat, the basket drain hole is clear, the pause pin moves freely, and the carafe lid is aligned so brewed that model can flow back into the pot.
Scale knocked loose during cleaning can partially block the internal path, so flush with two cycles of plain water or an equal parts vinegar and water rinse, then another water cycle to clear the smell.
If water still shows up from the base plate,, the internal hose or clamp may have shifted.
Unplug, let it cool, and if you are out of warranty you can remove the bottom cover to check for a loose silicone line and a weak spring clamp.
No disassembly required for the earlier checks, so try those first.
 Is a stainless steel garden hose reel worth it?
Asked 2 months ago • 53 votes
   32 votes 
 
Answered 2 months ago 
 I was nervous about drilling, but taping the bracket, marking bit depth, drilling slowly, & blowing out dust made it easy, & thread tape with a short leader hose protects the spigot. This wall mount has stayed smooth and hassle free through ugly weather and mud, and I wish I had skipped the cart.